Epoxy Flooring in Pinellas Park, FL

A lot of the epoxy flooring we plan in Pinellas Park goes under machinery, not minivans. Wikipedia notes that Lockheed Martin Aeronautics runs a facility in the city doing metal forming, fabrication and assembly, that optical manufacturers such as Transitions Optical work here or in the nearby Gateway area, and that marine businesses are common thanks to the Gulf and Tampa Bay. Industrial and commercial floors in a town like this need a different system from a weekend garage.

Matching the coating to the work

• Fabrication and machine shops: thick, 100% solids epoxy that resists hot metal, dropped parts and cutting fluid.
• Marine service bays: a chemical-resistant topcoat over a textured base, since fuel, resin and saltwater all hit the floor.
• Clean assembly rooms: a smooth, light-colored finish that is easy to inspect and wipe down.
• Warehouses: abrasion-resistant coatings with striped aisles and marked forklift lanes.

We walk the space with you, ask what gets dropped and spilled, and write the recommendation into the quote.

Flat ground and a long history of high water

Pinellas Park sits at about 13 feet, and Wikipedia says its low, flat terrain made it prone to flooding until the Pinellas Park Water Management District built a network of drainage canals. Flooding is far less common now, but groundwater is still close under many slabs. Every slab is tested first, and a vapor-tolerant primer goes down when the numbers warrant it.

Get a Free Estimate

Garages from the 1970s boom

The 1970s produced 31.7% of the homes standing in Pinellas Park today, per Census data on Point2Homes, and the median build year is 1978. A slab that age has usually been sealed, stained or patched at least once. Grinding takes all of that down to fresh concrete so a new coating has something solid to bond to. Expect us to note crack repair and joint filling as separate line items.

Manufactured home pads and carports

About 15.3% of the city's housing is mobile homes, per the same ACS figures. Carport slabs, sheds and screened patios beside those homes are good candidates for a simple flake system. They are smaller jobs, often finished in a day, and a textured topcoat keeps them safe to walk on after an afternoon storm.

Keeping a plant running

Shutting down a production floor is expensive. We can phase the coating, schedule nights or weekends, and choose fast-cure materials where the timeline is tight. Ask about that during the walkthrough so the plan fits your shifts.